[KSC75 Froggie Mod is a removable cable mod for KSC75. This model is for MMCX connectors.]
(NOW with added "EZ Print" STL to print as one part)
This isn't the first design for an MMCX connector to be added to KSC75, but this is the best design for an MMCX connector for the KSC75. I designed this specifically because of my dissatisfaction with the current design that sticks the connector far out and straight down and restricts the hinge on the driver by a significant amount. My design seeks to fix all of those problems. The angled connector solves 3 issues: comfort, leverage, and pull direction. With the old design when you pull on the cable it pulls it straight down which causes pressure on the top most part of you ear, with the new design pulling downward now rotates the ear-clip as you pull which distributes the load across the back of the ear rather than at a singular point. The problem I had with leverage was specifically when I went to lay down in these as KSC75 are my primary headphones to sleep in. with the old style connector I wouldn't even consider laying on my side with a headphone between me and my pillow because I was afraid of breaking the mmcx connectors, with my new design there's no worry about that since the connector is no longer jutting out at such a harsh angle. The comfort of these compared to the old design is unmatched, with the hinge no longer restricted by the ring on the old model, the KSC75 can freely fit flush against your ear.
3.5mm Version: https://cults3d.com/en/3d-model/various/ksc75-froggie-mod-3-5mm
If you want the old model instead here it is, shout out to gumo_design for making it so long ago. https://www.thingiverse.com/thing:3378059 or the within Notion page:
If you need help with printing? Have questions about the designs? Want to keep up with what we're prototyping? Join our discord https://discord.gg/fb4HdDvErF
.2mm layer height or you might have issues.
Parts:
Wire: reuse enameled wire from stock cable
Connector: https://www.amazon.com/dp/B082657TSQ
Screws: 2x M2*6 Self tapping flat screws
Glue: small dab of super glue to keep the connector from sliding around.